Manual flush valve toilet, stainless steel sink can be frustrating, you may not immediately see the problem in the toilet tank. The operation may seem complex, but the flushing system, a simple process. When you flush, connecting rod, to open the flush valve, tank emptying. Runoff due to the water tank, tank ball float to the surface, when the tank is completely close the valve. If this order is not to flush the system will not work properly. Toilet tank may be of different sizes and layouts, but all the works in the same
1 Remove the lid from the toilet tank.
2 take a look into the tank to see if the tank ball is obstructed in any way. If it is not clear to move up and down to release the tank ball. Sometimes, the tank ball down flush valve itself.
3 Turn off the water supply. Rinse tank is dry.
From the hook on the flush valve is connected to the outside toilet handle at the top of the clip. The clip is usually an S-shaped hook. Release hooks, kitchen faucets so the handle is independent.
5 Remove the flush valve. The flush valve manually cropped to the central toilet plunger. Flush valve, flush handle plastic oval object. Slight upward move, the separation unit.
6, check the vertical mechanism. Verify that it moves up and down freely.
7 Close the flush valve upside down, check the gasket. Damaged common fault with manual flush valve gasket, an oval-shaped membrane, pull the central mechanism.
8 Remove the gasket if it is damaged, toilet flush valve and install a new one. Reorganization of the toilet tank and turn the water supply.
China Flush Valve, Stainless Steel Toilet, Stainless Steel Wash Basin, Flushometer Valve, Flush Toilet, Time Delay Tap Suppliers
Welcome to our website. http://www.haixin-publicbathroom.com/
No comments:
Post a Comment